|
Next: 7N400-L1
|
| Author |
Message |
External
Since: Jul 31, 2003
Posts: 6
|
(Msg. 1) Posted: Thu Jul 31, 2003 2:44 pm
Post subject: replacement chipset fan for GA7DX
Archived from groups: alt>comp>periphs>mainboard>gigabyte (more info?)
|
|
|
Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
motherboard? While I was replacing a hard drive I noticed that the fan
stopped moving right after I vacuumed dust out of the system.
It's markings are as follow:
AVC Model D4010S12H fan 12V DC 0.10A
It's specifications are:
Size: 40x40x10mm
Current amps: 0.10
Input power watts: 0.20
Speed rpm: 6000
Airflow CFM: 6.85
Static Pressure : 0.095
Noise dB(A): 29
Weight grams: 15
2 pin female berg connector
I found these specs on a Japanese web site. The fan was always observed to
be moving very slowly which I had assumed was normal. Without the fan the
temperature of it's heat sink will rise to 98F with the case cover removed.
I suspect that the fans requirement is borderline in a system with auxiliary
cooling fans. I wish to replace it however.
Cheers,
Mike H. |
|
| Back to top |
|
 | |
External
Since: Jul 31, 2003
Posts: 4
|
(Msg. 2) Posted: Fri Aug 01, 2003 1:06 am
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Mike H." schrieb im Newsbeitrag
> Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> motherboard? While I was replacing a hard drive I noticed that the fan
> stopped moving right after I vacuumed dust out of the system.
>
> It's markings are as follow:
> AVC Model D4010S12H fan 12V DC 0.10A
>
> It's specifications are:
> Size: 40x40x10mm
> Current amps: 0.10
> Input power watts: 0.20
> Speed rpm: 6000
> Airflow CFM: 6.85
> Static Pressure : 0.095
> Noise dB(A): 29
> Weight grams: 15
> 2 pin female berg connector
>
> I found these specs on a Japanese web site. The fan was always observed to
> be moving very slowly which I had assumed was normal. Without the fan the
> temperature of it's heat sink will rise to 98F with the case cover
removed.
>
> I suspect that the fans requirement is borderline in a system with
auxiliary
> cooling fans. I wish to replace it however.
>
> Cheers,
> Mike H.
>
>
You may wish so but i would not do it. If you´re all set Tiger is producing
a fan that fits on nicely and is as useless as the original one...i´m
running the same board since 1,5 years with no fan, before i tried the Tiger
which is as noisy as the gigabyte
Thorsten >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jul 27, 2004
Posts: 353
|
(Msg. 3) Posted: Sat Aug 02, 2003 1:58 am
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Mike,
This is a little late but....
Never ever use a vacuum cleaner near electronic stuff!!!!!!!!
Vacuum cleaners spit static electricity even when they suck.
Unless of course it is purpose designed and has earthing connectors and all
that.
Outside the case with covers on is ok.
- Tim
"Mike H." wrote in message
> Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> motherboard? While I was replacing a hard drive I noticed that the fan
> stopped moving right after I vacuumed dust out of the system.
>
> It's markings are as follow:
> AVC Model D4010S12H fan 12V DC 0.10A
>
> It's specifications are:
> Size: 40x40x10mm
> Current amps: 0.10
> Input power watts: 0.20
> Speed rpm: 6000
> Airflow CFM: 6.85
> Static Pressure : 0.095
> Noise dB(A): 29
> Weight grams: 15
> 2 pin female berg connector
>
> I found these specs on a Japanese web site. The fan was always observed to
> be moving very slowly which I had assumed was normal. Without the fan the
> temperature of it's heat sink will rise to 98F with the case cover
removed.
>
> I suspect that the fans requirement is borderline in a system with
auxiliary
> cooling fans. I wish to replace it however.
>
> Cheers,
> Mike H.
>
> >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jun 29, 2003
Posts: 55
|
(Msg. 4) Posted: Sat Aug 02, 2003 3:41 am
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Mike H. wrote:
> Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> motherboard? While I was replacing a hard drive I noticed that the fan
> stopped moving right after I vacuumed dust out of the system.
>
> It's markings are as follow:
> AVC Model D4010S12H fan 12V DC 0.10A
>
> It's specifications are:
> Size: 40x40x10mm
> Current amps: 0.10
> Input power watts: 0.20
> Speed rpm: 6000
> Airflow CFM: 6.85
> Static Pressure : 0.095
> Noise dB(A): 29
> Weight grams: 15
> 2 pin female berg connector
>
> I found these specs on a Japanese web site. The fan was always
> observed to be moving very slowly which I had assumed was normal.
> Without the fan the temperature of it's heat sink will rise to 98F
> with the case cover removed.
>
> I suspect that the fans requirement is borderline in a system with
> auxiliary cooling fans. I wish to replace it however.
>
> Cheers,
> Mike H.
<a rel="nofollow" style='text-decoration: none;' href="http://sidewindercomputers.com/50milfan.html" target="_blank">http://sidewindercomputers.com/50milfan.html</a>
--
Winerr 00B - Push Error; Removing Files to Make Room for Advertisement >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Aug 02, 2003
Posts: 2
|
(Msg. 5) Posted: Sat Aug 02, 2003 9:47 am
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"S.Heenan" wrote in message
: Mike H. wrote:
: > Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
: > motherboard? While I was replacing a hard drive I noticed that the fan
: > stopped moving right after I vacuumed dust out of the system.
: >
: > It's markings are as follow:
: > AVC Model D4010S12H fan 12V DC 0.10A
: >
: > It's specifications are:
: > Size: 40x40x10mm
: > Current amps: 0.10
: > Input power watts: 0.20
: > Speed rpm: 6000
: > Airflow CFM: 6.85
: > Static Pressure : 0.095
: > Noise dB(A): 29
: > Weight grams: 15
: > 2 pin female berg connector
: >
: > I found these specs on a Japanese web site. The fan was always
: > observed to be moving very slowly which I had assumed was normal.
: > Without the fan the temperature of it's heat sink will rise to 98F
: > with the case cover removed.
: >
: > I suspect that the fans requirement is borderline in a system with
: > auxiliary cooling fans. I wish to replace it however.
: >
: > Cheers,
: > Mike H.
:
: http://sidewindercomputers.com/50milfan.html
: --
: Winerr 00B - Push Error; Removing Files to Make Room for Advertisement
:
Check out the Zalman Silent Motherboard Heatsink (ZM-NB32J) -
http://www.quietpc.com/uk/vgamb.php >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jul 31, 2003
Posts: 6
|
(Msg. 6) Posted: Mon Aug 04, 2003 11:13 am
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
This is useful advice. Thanks you. What about vacuum cleaners that are made
for cleaning PCs?
Mike H.
"Tim" wrote in message
> Mike,
>
> This is a little late but....
>
> Never ever use a vacuum cleaner near electronic stuff!!!!!!!!
> Vacuum cleaners spit static electricity even when they suck.
>
> Unless of course it is purpose designed and has earthing connectors and
all
> that.
> Outside the case with covers on is ok.
>
> - Tim
>
>
> > Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> > motherboard? While I was replacing a hard drive I noticed that the fan
> > stopped moving right after I vacuumed dust out of the system.
> >
> > It's markings are as follow:
> > AVC Model D4010S12H fan 12V DC 0.10A
> >
> > It's specifications are:
> > Size: 40x40x10mm
> > Current amps: 0.10
> > Input power watts: 0.20
> > Speed rpm: 6000
> > Airflow CFM: 6.85
> > Static Pressure : 0.095
> > Noise dB(A): 29
> > Weight grams: 15
> > 2 pin female berg connector
> >
> > I found these specs on a Japanese web site. The fan was always observed
to
> > be moving very slowly which I had assumed was normal. Without the fan
the
> > temperature of it's heat sink will rise to 98F with the case cover
> removed.
> >
> > I suspect that the fans requirement is borderline in a system with
> auxiliary
> > cooling fans. I wish to replace it however.
> >
> > Cheers,
> > Mike H.
> >
> >
>
> >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jul 31, 2003
Posts: 6
|
(Msg. 7) Posted: Mon Aug 04, 2003 11:33 am
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Thanks for the sources. Are the screw sizes standardized?
Mike H.
"TouchStone" wrote in message
>
> : Mike H. wrote:
> : > Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> : > motherboard? While I was replacing a hard drive I noticed that the fan
> : > stopped moving right after I vacuumed dust out of the system.
> : >
> : > It's markings are as follow:
> : > AVC Model D4010S12H fan 12V DC 0.10A
> : >
> : > It's specifications are:
> : > Size: 40x40x10mm
> : > Current amps: 0.10
> : > Input power watts: 0.20
> : > Speed rpm: 6000
> : > Airflow CFM: 6.85
> : > Static Pressure : 0.095
> : > Noise dB(A): 29
> : > Weight grams: 15
> : > 2 pin female berg connector
> : >
> : > I found these specs on a Japanese web site. The fan was always
> : > observed to be moving very slowly which I had assumed was normal.
> : > Without the fan the temperature of it's heat sink will rise to 98F
> : > with the case cover removed.
> : >
> : > I suspect that the fans requirement is borderline in a system with
> : > auxiliary cooling fans. I wish to replace it however.
> : >
> : > Cheers,
> : > Mike H.
> :
<font color=purple> > : <a rel="nofollow" style='text-decoration: none;' href="http://sidewindercomputers.com/50milfan.html</font" target="_blank">http://sidewindercomputers.com/50milfan.html</font</a>>
> : --
> : Winerr 00B - Push Error; Removing Files to Make Room for Advertisement
> :
>
> Check out the Zalman Silent Motherboard Heatsink (ZM-NB32J) -
<font color=purple> > <a rel="nofollow" style='text-decoration: none;' href="http://www.quietpc.com/uk/vgamb.php</font" target="_blank">http://www.quietpc.com/uk/vgamb.php</font</a>>
>
> >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jun 29, 2003
Posts: 55
|
(Msg. 8) Posted: Mon Aug 04, 2003 3:56 pm
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Mike H. wrote:
> Thanks for the sources. Are the screw sizes standardized?
Screws are normally supplied. If not, a trip to the local hardware store may
be in order.
--
Winerr 00B - Push Error; Removing Files to Make Room for Advertisement >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jul 31, 2003
Posts: 6
|
(Msg. 9) Posted: Mon Aug 04, 2003 5:08 pm
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
The issue is weather the screws will fit the heatsink already on the
motherboard.
"S.Heenan" wrote in message
> Mike H. wrote:
> > Thanks for the sources. Are the screw sizes standardized?
>
> Screws are normally supplied. If not, a trip to the local hardware store
may
> be in order.
> --
> Winerr 00B - Push Error; Removing Files to Make Room for Advertisement
>
> >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jul 27, 2004
Posts: 353
|
(Msg. 10) Posted: Tue Aug 05, 2003 5:11 pm
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
There are mini vacuum cleaners available from electronics shops that give
one the impression that they *may* be suitable, but I doubt if they have
enough umpf so have never bothered looking closely at them.
Most people use cans of compressed air that are made specifically for the
purpose - again from electronics shops.
Others use paintbrushes - engineers are often seen using paintbrushes with
bristels made from copper wire.
I have used ordinary horse hair brushes in the past (in desparation). I
brush it over the metal case then the part, then the case...
Either that or I blow hard and try not to spit!
- Tim
"Mike H." wrote in message
> This is useful advice. Thanks you. What about vacuum cleaners that are
made
> for cleaning PCs?
>
> Mike H.
> > Mike,
> >
> > This is a little late but....
> >
> > Never ever use a vacuum cleaner near electronic stuff!!!!!!!!
> > Vacuum cleaners spit static electricity even when they suck.
> >
> > Unless of course it is purpose designed and has earthing connectors and
> all
> > that.
> > Outside the case with covers on is ok.
> >
> > - Tim
> >
> >
> > > Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> > > motherboard? While I was replacing a hard drive I noticed that the fan
> > > stopped moving right after I vacuumed dust out of the system.
> > >
> > > It's markings are as follow:
> > > AVC Model D4010S12H fan 12V DC 0.10A
> > >
> > > It's specifications are:
> > > Size: 40x40x10mm
> > > Current amps: 0.10
> > > Input power watts: 0.20
> > > Speed rpm: 6000
> > > Airflow CFM: 6.85
> > > Static Pressure : 0.095
> > > Noise dB(A): 29
> > > Weight grams: 15
> > > 2 pin female berg connector
> > >
> > > I found these specs on a Japanese web site. The fan was always
observed
> to
> > > be moving very slowly which I had assumed was normal. Without the fan
> the
> > > temperature of it's heat sink will rise to 98F with the case cover
> > removed.
> > >
> > > I suspect that the fans requirement is borderline in a system with
> > auxiliary
> > > cooling fans. I wish to replace it however.
> > >
> > > Cheers,
> > > Mike H.
> > >
> > >
> >
> >
>
> >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
External
Since: Jul 31, 2003
Posts: 6
|
(Msg. 11) Posted: Tue Aug 05, 2003 5:11 pm
Post subject: Re: replacement chipset fan for GA7DX [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I use both. The small vacuum cleaners don't have a lot of power, but seem to
work reasonably well and are not strong enough to suck off a snug fitting
connector. When the dust is thick I prefer not to just blow it on to my tech
bench or into the air. The cans of tetrafluroethane etc. are good for the
tight spaces.
Cheers,
Mike H.
"Tim" wrote in message
> There are mini vacuum cleaners available from electronics shops that give
> one the impression that they *may* be suitable, but I doubt if they have
> enough umpf so have never bothered looking closely at them.
>
> Most people use cans of compressed air that are made specifically for the
> purpose - again from electronics shops.
> Others use paintbrushes - engineers are often seen using paintbrushes with
> bristels made from copper wire.
> I have used ordinary horse hair brushes in the past (in desparation). I
> brush it over the metal case then the part, then the case...
>
> Either that or I blow hard and try not to spit!
>
> - Tim
>
>
> > This is useful advice. Thanks you. What about vacuum cleaners that are
> made
> > for cleaning PCs?
> >
> > Mike H.
> > > Mike,
> > >
> > > This is a little late but....
> > >
> > > Never ever use a vacuum cleaner near electronic stuff!!!!!!!!
> > > Vacuum cleaners spit static electricity even when they suck.
> > >
> > > Unless of course it is purpose designed and has earthing connectors
and
> > all
> > > that.
> > > Outside the case with covers on is ok.
> > >
> > > - Tim
> > >
> > >
> > > > Where can I purchase a replacement chip set fan for a Gigabyte GA7DX
> > > > motherboard? While I was replacing a hard drive I noticed that the
fan
> > > > stopped moving right after I vacuumed dust out of the system.
> > > >
> > > > It's markings are as follow:
> > > > AVC Model D4010S12H fan 12V DC 0.10A
> > > >
> > > > It's specifications are:
> > > > Size: 40x40x10mm
> > > > Current amps: 0.10
> > > > Input power watts: 0.20
> > > > Speed rpm: 6000
> > > > Airflow CFM: 6.85
> > > > Static Pressure : 0.095
> > > > Noise dB(A): 29
> > > > Weight grams: 15
> > > > 2 pin female berg connector
> > > >
> > > > I found these specs on a Japanese web site. The fan was always
> observed
> > to
> > > > be moving very slowly which I had assumed was normal. Without the
fan
> > the
> > > > temperature of it's heat sink will rise to 98F with the case cover
> > > removed.
> > > >
> > > > I suspect that the fans requirement is borderline in a system with
> > > auxiliary
> > > > cooling fans. I wish to replace it however.
> > > >
> > > > Cheers,
> > > > Mike H.
> > > >
> > > >
> > >
> > >
> >
> >
>
> >> Stay informed about: replacement chipset fan for GA7DX |
|
| Back to top |
|
| |
FAQ
Profile
Private Messages
Log in
